EUDR-1 5/8
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN LSE307BXHF
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE307BXHF is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | 3ttt3catb7 |
| Bearing - Housing - Seal | LSE307BXH |
| Bearing Number | LSE307BX |
| Bearing Type | Split Cylindrical Expansion Type |
| Bearing UPC | 013992026354 |
| Bolt Size | 4 x M16 |
| Cor - Static Load Rating | 51931 lbf231 kN |
| Cr - Dynamic Load Rating | 42039 lbf187 kN |
| Dimension H | 79 mm3.1 in |
| Dimension L | 146 mm5.8 in |
| Dimension N | 215.9 mm8.5 in |
| Dimension P | 19 mm0.7 in |
| Dimension R | 274 mm10.8 in |
| Dimension T | 330 mm13.0 in |
| Dimension V | 3 mm0.1 in |
| Maximum Speed | 2790 rpm |
| Note | This product line was formerly known as Revolvo |
| Seal Type | Felt Seal |
| Series Type | Light Series |
| Shaft Size | 3-7/16 in |
| Support Type | Round Flange |
NAU4LKBF205-14
📏 Dimensions on request
QVVPF28V415S
📏 Dimensions on request
MSM105BRHF
📏 Dimensions on request
SR 130x9.5
📏 Dimensions on request
SAF 22517 2-7/8
📏 Dimensions on request
UELF205-16
📏 Dimensions on request
QVTU22V312S
📏 Dimensions on request
MSE503BXHFKPS
📏 Dimensions on request
SUCSP205-16/F
📏 Dimensions on request
HSE615BRHFRSS
📏 Dimensions on request
QAAFX18A303S
📏 Dimensions on request
QMF10J050S
📏 Dimensions on request
MSE1100BXHFKPS
📏 Dimensions on request