783 - 773
📏 Dimensions on request
Product Photo
TIMKENCylindrical Roller Bearings
TIMKEN LSE211BRHSNRSS
Cylindrical Roller Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE211BRHSNRSS is a Cylindrical Roller Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Cylindrical Roller Bearings |
| Type | Cylindrical Roller Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | dUl8vi4t3G |
| Bearing Number | LSE211BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bearing UPC | 013992025975 |
| Bolt Size | 2 x M20 |
| Ca - Axial Load Rating | 1708.53 lbf7.60 kN |
| Cor - Static Load Rating | 36194 lbf161 kN |
| Cr - Dynamic Load Rating | 31024 lbf138 kN |
| Dimension H | 95 mm |
| Dimension H2 | 208 mm |
| Dimension J | 260 mm |
| Dimension L | 315 mm |
| Dimension M | 90 mm |
| Housing Width | 112 mm4.4 in |
| Maximum Speed | 3310 rpm |
| Note | This product line was formerly known as Revolvo |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - Angled |
| Seal Type | Viton Single Lip |
| Series Type | Light Series |
| Shaft Size | 2-11/16 in |
| Support Type | Two-Bolt Plummer Block |
MSE415BRHTTKPS
📏 Dimensions on request
LSE104BRHSAFQ
📏 Dimensions on request
LSE203BRHSAFQ
📏 Dimensions on request
LSE1700BXHSATL
📏 Dimensions on request
HM88547 - HM88512
📏 Dimensions on request
MSE307BRHSAFQARSS
📏 Dimensions on request
MSE111BRHSATL
📏 Dimensions on request
HSE1800BRHSKPS
📏 Dimensions on request
MSE304BXHSAFQA
📏 Dimensions on request
67389 - 67322-B
📏 Dimensions on request