SN3028
📏 140 mm
Product Photo
INACustom & Special Bearings
INA KUVE55-B
Custom & Special Bearings · 140 mm
140Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE55-B is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 140 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 140 mm |
| Catalogue Ref. | 2YkEgTc4d5 |
| 1) | Locating surface |
| 2) | Marking |
| 3) | According to DIN 71 412-B M6 Standard, Tapered lubrication nipple supplied loose |
| A1 | 43.5 mm |
| A2 | Series 12 mm |
| A3 | 15 mm |
| A4 | 15 mm |
| B | 140 mm |
| C | 104000 N |
| C0 | 213000 N |
| H | 70 mm |
| H1 | 13.5 mm |
| H4 | 22.7 mm |
| HSeries 5 | 11.25 mm |
| JB | 116 mm |
| JL | 95 mm |
| JL6 | 30.5 mm |
| JLZ | 70 mm |
| K1 | M14 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K3 | M12 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K6 | M12 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| L | 173.6 mm |
| L1 | 132 mm |
| LS | 2.2 mm |
| N3 | 5.5 mm |
| N4 | 5.5 mm |
| S | 0.Series 8 mm |
| Series G2 | M14 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M5 = Series 5,Series 8 M6 = Series 10 M8 = 24 M10 = Series 41 M12 = 83 M14 = 140 If possible, Screw locking measures required. |
| Series M0x | 5600 Nm |
| Series M0y | 2730 Nm |
| Series M0z | 2730 Nm |
| T6 | 18 mm |
| TSeries 5 | 21 mm |
| W6 | 6 mm |
| aL max | 107 mm |
| aL min | Series 20 mm |
| aR max | 107 mm |
| aR min | Series 20 mm |
| b | 53 mm |
| h | 41.5 mm |
| h1 | 19.5 mm |
| jL | 120 mm |
| lmax | 2520 mm |
| mS | 14 kg/m |
| mW | 5500 g |
SN620F
📏 140 mm
V215C115-90
📏 140 mm
SN3126
📏 140 mm
RWU55-E
📏 140 mm
V210C115-115
📏 140 mm
V210C140-115
📏 140 mm
V215C110-110
📏 140 mm
SN524
📏 140 mm
KWVE55-B
📏 140 mm
V210C125-125
📏 140 mm
RUE55-E-L
📏 140 mm
RWU55-E-L
📏 140 mm
KWVE55-B-L
📏 140 mm