KWVE35-WL
📏 162 mm
Product Photo
INACustom & Special Bearings
INA KUVE35-WL
Custom & Special Bearings · 162 mm
162Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE35-WL is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 162 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 162 mm |
| Catalogue Ref. | 8lXoMJ2O1D |
| 1) | LocatingSurface |
| 2) | mark |
| 3) | according to DIN 71 412-B M6 Standard type,Withcone-headedLubricationMouth is provided loosely |
| A1 | 36 mm |
| A2 | 9 mm |
| A3 | 14.3 mm |
| AL1 | 19 mm |
| B | 162 mm |
| C | 47500 N |
| C0 | 100000 N |
| G2 | M10 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M5 = 5,8 M6 = 10 M8 = 24 M10 = 41 M12 = 83 M14 = 140 if possible,Measures should be taken to prevent screws from loosening. |
| H | 50 mm |
| H1 | 6.8 mm |
| H4 | 16.3 mm |
| H5 | 6.5 mm |
| JB | 144 mm |
| JL | 80 mm |
| K1 | M8 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 if possible,Measures should be taken to prevent screws from loosening. |
| K3 | M8 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 if possible,Measures should be taken to prevent screws from loosening. |
| K6 | M8 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 if possible,Measures should be taken to prevent screws from loosening. |
| L | 140.2 mm |
| L1 | 109.8 mm |
| M0x | 5550 Nm |
| M0y | 1890 Nm |
| M0z | 1890 Nm |
| T5 | 13 mm |
| T6 | 13 mm |
| a5 | 15 mm |
| aL max | 71 mm |
| aL min | 20 mm |
| aR max | 71 mm |
| aR min | 20 mm |
| b | 90 mm |
| h | 27 mm |
| h1 | 15 mm |
| jB | 60 mm |
| jL | 80 mm |
| lmax | 2960 mm |
| mS | 17.4 kg/m |
| mW | 4110 g |
HCCE 030 R
📏 167 mm
RUDS65-D
📏 168 mm
RWU65-E
📏 170 mm
V270C135-135
📏 170 mm
SN532
📏 170 mm
V260C150-150
📏 170 mm
RUE65-E-L
📏 170 mm
SN626F
📏 170 mm
SD3036
📏 170 mm
V270C140-140
📏 170 mm
SN232
📏 170 mm
SN626
📏 170 mm
SN532F
📏 170 mm