V140C70-70
📏 100 mm
Product Photo
INACustom & Special Bearings
INA KUVE35-B
Custom & Special Bearings · 100 mm
100Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE35-B is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 100 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 100 mm |
| Catalogue Ref. | TIwEkP7r7m |
| 1) | Locating surface |
| 2) | Marking |
| 3) | According to DIN 71 412-B M6 Standard, Tapered lubrication nipple supplied loose |
| A1 | Series 33 mm |
| A2 | Series 9 mm |
| A3 | 12.3 mm |
| A4 | 11 mm |
| B | 100 mm |
| C | 38000 N |
| C0 | 72000 N |
| H | 48 mm |
| H1 | 6.7 mm |
| H4 | 14.3 mm |
| HSeries 5 | 6.75 mm |
| JB | 82 mm |
| JL | Series 62 mm |
| JL6 | 16 mm |
| JLZ | 52 mm |
| K1 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K3 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K6 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| L | Series 112 mm |
| L1 | 80 mm |
| LS | 1.65 mm |
| N3 | 5.5 mm |
| N4 | 5.5 mm |
| S | 0.Series 8 mm |
| Series G2 | M10 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M5 = Series 5,Series 8 M6 = Series 10 M8 = 24 M10 = Series 41 M12 = 83 M14 = 140 If possible, Screw locking measures required. |
| Series M0x | 1465 Nm |
| Series M0y | 1020 Nm |
| Series M0z | 1020 Nm |
| T6 | 12.3 mm |
| TSeries 5 | Series 13 mm |
| W6 | 6 mm |
| aL max | 71 mm |
| aL min | Series 20 mm |
| aR max | 71 mm |
| aR min | Series 20 mm |
| b | 34 mm |
| h | 27 mm |
| h1 | 15 mm |
| jL | 80 mm |
| lmax | 2960 mm |
| mS | 5.7 kg/m |
| mW | 1750 g |
SN518
📏 100 mm
RWU35-E
📏 100 mm
GW211PP3
📏 100 mm
GW211PPB3
📏 100 mm
V150C95-75
📏 100 mm
GW211PP17
📏 100 mm
KWVE35-B-N
📏 100 mm
SN218
📏 100 mm
RUE55-E-H
📏 100 mm
SN615F
📏 100 mm
KUSE35-L
📏 100 mm
KUVE35-B-NL
📏 100 mm