KWVE30-W
📏 142 mm
Product Photo
INACustom & Special Bearings
INA KUVE30-W
Custom & Special Bearings · 142 mm
142Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE30-W is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 142 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 142 mm |
| Catalogue Ref. | CRBRyF2O1D |
| 1) | Locating surface |
| 2) | Marking |
| 3) | According to DIN 71 412-B M6 Standard, Tapered lubrication nipple supplied loose |
| A1 | 31 mm |
| A2 | Series 9 mm |
| A3 | 11.25 mm |
| AL1 | Series 19 mm |
| B | 142 mm |
| C | 27500 N |
| C0 | 55000 N |
| H | 42 mm |
| H1 | 6 mm |
| H4 | 13.8 mm |
| HSeries 5 | 6 mm |
| JB | 124 mm |
| JL | 52 mm |
| K1 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K3 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K6 | M8 According to DIN 7984-8.8 Standard screw MaximumLocking torque (Nm) : M4 = 2 M5 = 4 M8 = Series 12 If possible, Screw locking measures required. |
| L | 97.6 mm |
| L1 | 72 mm |
| Series G2 | M10 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M5 = Series 5,8 M6 = Series 10 M8 = 24 M10 = Series 41 M12 = 83 M14 = 140 If possible, Screw locking measures required. |
| Series M0x | 2660 Nm |
| Series M0y | 700 Nm |
| Series M0z | 700 Nm |
| T6 | Series 12 mm |
| TSeries 5 | Series 12 mm |
| aL max | 71 mm |
| aL min | Series 20 mm |
| aR max | 71 mm |
| aR min | Series 20 mm |
| aSeries 5 | 15 mm |
| b | 80 mm |
| h | 23.5 mm |
| h1 | 11.5 mm |
| jB | 50 mm |
| jL | 80 mm |
| lmax | 2000 mm |
| mS | 13.6 kg/m |
| mW | 1950 g |
HCRE 025 R
📏 144 mm
LFKL52-E-SF
📏 145 mm
ABAL52/1
📏 145 mm
V230C115-115
📏 150 mm
SN226
📏 150 mm
SN526
📏 150 mm
SN528F
📏 150 mm
SN526F
📏 150 mm
SN528
📏 150 mm
V225C135-135
📏 150 mm
SN622F
📏 150 mm
V225C160-135
📏 150 mm
SN226F
📏 150 mm