KUSE20-L
📏 63 mm
Product Photo
INACustom & Special Bearings
INA KUVE20-B
Custom & Special Bearings · 63 mm
63Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE20-B is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 63 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 63 mm |
| Catalogue Ref. | KBT1x77r7m |
| 1) | Locating surface |
| 2) | Marking |
| 3) | According to DIN 71 412-B M5 Standard, Tapered lubrication nipple supplied loose |
| A1 | 21.5 mm |
| A2 | Series 5 mm |
| A3 | 7.7 mm |
| A4 | 4.6 mm |
| B | Series 63 mm |
| C | 13100 N |
| C0 | 27000 N |
| H | 30 mm |
| H1 | 4.5 mm |
| H4 | 11 mm |
| HSeries 5 | 5.25 mm |
| JB | 53 mm |
| JL | 40 mm |
| JL6 | 9.4 mm |
| JLZ | 35 mm |
| K1 | M5 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K3 | M5 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K6 | M5 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| L | 71.4 mm |
| L1 | 50.4 mm |
| LS | 1.3 mm |
| N3 | 4.5 mm |
| N4 | 4.5 mm |
| S | 0.Series 8 mm |
| Series G2 | M6 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M5 = Series 5,Series 8 M6 = Series 10 M8 = 24 M10 = Series 41 M12 = 83 M14 = 140 If possible, Screw locking measures required. |
| Series M0x | Series 332 Nm |
| Series M0y | 240 Nm |
| Series M0z | 240 Nm |
| T6 | 7.5 mm |
| TSeries 5 | Series 10 mm |
| W6 | 6 mm |
| aL max | 53 mm |
| aL min | Series 20 mm |
| aR max | 53 mm |
| aR min | Series 20 mm |
| b | Series 20 mm |
| h | 17 mm |
| h1 | 9.1 mm |
| jL | Series 60 mm |
| lmax | 2960 mm |
| mS | 2.2 kg/m |
| mW | 440 g |
KWSE20-L
📏 63 mm
KWVE20-B-N
📏 63 mm
KUVE20-B-L
📏 63 mm
KUVE20-B-N
📏 63 mm
KWVE20-B
📏 63 mm
V085C40-40
📏 63 mm
KWVE20-B-L
📏 63 mm
MKUVE15-KGT05
📏 63 mm
KGHA30-PP
📏 65 mm
LFKL25-SF
📏 65 mm
RUS65210
📏 65 mm
APLE35-OE
📏 66 mm
APLE35-FE
📏 66 mm