BKE.TKSD25-H-SO
📏 47 mm
Product Photo
INACustom & Special Bearings
INA KUVE15-B
Custom & Special Bearings · 47 mm
47Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE15-B is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 47 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 47 mm |
| Catalogue Ref. | k1xe8t7r7m |
| 1) | Locating surface |
| 2) | Marking |
| 3) | According to DIN 3 405 M3 Standard, Lubrication nipple supplied loose |
| A1 | 16 mm |
| A2 | 4.5 mm |
| A3 | 4.3 mm |
| A4 | 3.2 mm |
| B | 47 mm |
| C | 7200 N |
| C0 | 14500 N |
| H | 24 mm |
| H1 | 4.3 mm |
| H4 | 7.6 mm |
| HSeries 5 | 4.75 mm |
| JB | 38 mm |
| JL | 30 mm |
| JL6 | 9.1 mm |
| JLZ | 26 mm |
| K1 | M4 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K3 | M4 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K6 | M4 According to DIN 7984-Series 8.Series 8 Standard screw MaximumLocking torque (Nm) : M4 = 2 M5 = 4 M6 = Series 8 M8 = Series 12 M10 = 35 If possible, Screw locking measures required. |
| L | 61.2 mm |
| L1 | 39.Series 8 mm |
| LS | 1.3 mm |
| N3 | 2.57 mm |
| N4 | 2.57 mm |
| S | 0.Series 8 mm |
| Series G2 | M5 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M5 = Series 5,Series 8 M6 = Series 10 M8 = 24 M10 = Series 41 M12 = 83 M14 = 140 If possible, Screw locking measures required. |
| Series M0x | 150 Nm |
| Series M0y | 100 Nm |
| Series M0z | 100 Nm |
| T6 | 5.Series 8 mm |
| TSeries 5 | 7 mm |
| W6 | 6 mm |
| aL max | 53 mm |
| aL min | Series 20 mm |
| aR max | 53 mm |
| aR min | Series 20 mm |
| b | 15 mm |
| h | 15 mm |
| h1 | Series 8.15 mm |
| jL | Series 60 mm |
| lmax | 1200 mm |
| mS | 1.44 kg/m |
| mW | 200 g |
BKE.TKVD25-O
📏 47 mm
BKE.TKSD25-O
📏 47 mm
BKE.TKVD25-H-SO
📏 47 mm
BKE.TKSD25-H
📏 47 mm
KWVE15-B
📏 47 mm
KWVE25-B-HS-SN
📏 48 mm
KWVE25-B-HL
📏 48 mm
KWVE25-B-HS-H
📏 48 mm
RWU25-D-H-FE
📏 48 mm
KUE25-H
📏 48 mm
RUE25-D-HL-OE
📏 48 mm
KWVE25-B-SN
📏 48 mm
KUVE25-B-HS-H
📏 48 mm