UELT206-18
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TU-TRB-65MM-ECC
Ball Bearing Units · Dimensions on request
21.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TU-TRB-65MM-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 21.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 21.0 lb |
| Catalogue Ref. | mBicEx9Yau |
| C0 Static Load Rating | 54000 lb |
| Dimension A1 | 1-1/16 in |
| Dimension A2 | 2-3/4 in |
| Dimension Ac | 3.825 in |
| Dimension B | 4 in |
| Dimension H | 6 in |
| Dimension H1 | 5-1/8 in |
| Dimension H2 | 4-15/16 in |
| Dimension L | 7-13/16 in |
| Dimension L1 | 5-1/16 in |
| Dimension L2 | 1-1/16 in |
| Dimension L3 | 4-1/2 in |
| Dimension N | 1-3/8 in |
| Dimension N1 | 1-1/4 in |
| Dimension N2 | 2-1/2 in |
| Dimension d1 | 4-1/16 in |
| Dimension d2 | 4.945 in |
| K Factor | 1.51 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 65 mm2.559 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-F |
| UPC Code | 0883450505451 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.17 |
| Y (if Fa/Fr > e) | 2.63 |
| e | 0.40 |
YTU SGT 35
📏 Dimensions on request
SD 352C
📏 Dimensions on request
LSM40BXHFATL
📏 Dimensions on request
SUCSP207/F
📏 Dimensions on request
SNT 519-616 - 21316 - TA316
📏 Dimensions on request
QVC19V080S
📏 Dimensions on request
UELP211-35
📏 Dimensions on request
SN 512
📏 Dimensions on request
NAU4LKAP210-31
📏 Dimensions on request
TAPA13K060S
📏 Dimensions on request
QACW15A212S
📏 Dimensions on request
SUCATBY206/FVSL613
📏 Dimensions on request
LSE504BRHFATL
📏 Dimensions on request