SUCBF207-23/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TU-TRB-1 7/8-ECO/ECO
Ball Bearing Units · Dimensions on request
12 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TU-TRB-1 7/8-ECO/ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12 lb |
| Catalogue Ref. | DIcatp5G5c |
| C0 Static Load Rating | 43000 lb |
| Dimension A1 | 11/16 in |
| Dimension A2 | 2-7/16 in |
| Dimension Ac | 4.6015 in |
| Dimension B | 3-1/2 in |
| Dimension H | 4-3/4 in |
| Dimension H1 | 4 in |
| Dimension H2 | 3-5/16 in |
| Dimension L | 6-5/16 in |
| Dimension L1 | 3-15/16 in |
| Dimension L2 | 15/16 in |
| Dimension L3 | 3-3/4 in |
| Dimension N | 1-1/8 in |
| Dimension N1 | 3/4 in |
| Dimension N2 | 1-15/16 in |
| Dimension d1 | 3-7/16 in |
| Dimension d2 | 4.196 in |
| K Factor | 1.83 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.875 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-1 7/8 |
| UPC Code | 0883450509701 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.Series 64 |
| Y (if Fa/Fr > e) | 3.18 |
| e | 0.33 |
C-UKF315D1;H2315X
📏 Dimensions on request
E-P4B-TRB-90MM-ECO
📏 Dimensions on request
QAACW10A200S
📏 Dimensions on request
QAAFY20A100S
📏 Dimensions on request
QMCW15J070S
📏 Dimensions on request
NAU4LKBFB207-20
📏 Dimensions on request
QAAFL18A307S
📏 Dimensions on request
SDAF 22522 3-13/16
📏 Dimensions on request
UCFL215-48
📏 Dimensions on request
MSE612BXHFATL
📏 Dimensions on request
GYE45KRRB SGT
📏 Dimensions on request
NAU4LKST205-16
📏 Dimensions on request
SUCSFL204-12/F
📏 Dimensions on request