QVVPR14V208S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TU-TRB-1 7/16-ECO/ECO
Ball Bearing Units · Dimensions on request
8.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TU-TRB-1 7/16-ECO/ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 8.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 8.00 lb |
| Catalogue Ref. | pO2ZUjbrcj |
| C0 Static Load Rating | 26000 lb |
| Dimension A1 | 17/32 in |
| Dimension A2 | 2-1/16 in |
| Dimension Ac | 4.2525 in |
| Dimension B | 3 in |
| Dimension H | 4-1/8 in |
| Dimension H1 | 3-1/2 in |
| Dimension H2 | 2-7/16 in |
| Dimension L | 5-3/32 in |
| Dimension L1 | 3-7/32 in |
| Dimension L2 | 11/16 in |
| Dimension L3 | 2-3/4 in |
| Dimension N | 7/8 in |
| Dimension N1 | 5/8 in |
| Dimension N2 | 1-7/16 in |
| Dimension d1 | 2-3/4 in |
| Dimension d2 | 3.345 in |
| K Factor | 1.31 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.4375 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-1 7/16 |
| UPC Code | 0883450509695 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.89 |
| Y (if Fa/Fr > e) | 2.28 |
| e | 0.46 |
CM-UKF212D1;H2312X
📏 Dimensions on request
QVVPF19V303S
📏 Dimensions on request
FSNT 530 - 23230 - TA230
📏 Dimensions on request
NAU4LKATBY210-31
📏 Dimensions on request
GYAE50RRB
📏 Dimensions on request
QVVFB15V208S
📏 Dimensions on request
1109KRR
📏 Dimensions on request
TU-8x18
📏 Dimensions on request
SUCBFB205-14/FVSL613
📏 Dimensions on request
QMPF26J500S
📏 Dimensions on request
TAPH13K204S
📏 Dimensions on request
SD 3040S
📏 Dimensions on request