SUCPLF206-20/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TTU-TRB-3
Ball Bearing Units · Dimensions on request
Series 29 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TTU-TRB-3 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 29 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 29 lb |
| Catalogue Ref. | ykqRfw8l8t |
| C0 Static Load Rating | 61200 lb |
| Dimension A | 2-1/4 in |
| Dimension A1 | 2-1/4 in |
| Dimension B | 4-1/2 in |
| Dimension H | Series 8-Series 5/16 in |
| Dimension H1 | 7-3/16 in |
| Dimension L | Series 8-1/2 in |
| Dimension L1 | Series 8 in |
| Dimension L2 | 4.46 in |
| Dimension Series H2 | 3.48 in |
| Dimension d1 | 4-Series 23/Series 32 in |
| Housing Width | 3 in |
| K Factor | 1.30 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 3 in |
| Shaft Size Type | Imperial |
| UPC Code | 053893778242 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.87 |
| Y (if Fa/Fr > e) | 2.26 |
| e | 0.46 |
QAFY10A200S
📏 Dimensions on request
QVVPG26V408S
📏 Dimensions on request
LSE900BRHF
📏 Dimensions on request
UEL209-28
📏 Dimensions on request
SAF 22626 4-5/16
📏 Dimensions on request
LSE200BXHG
📏 Dimensions on request
E-PF-TRB-75MM
📏 Dimensions on request
69790400345
📏 Dimensions on request
SDAF 22532 5-1/2
📏 Dimensions on request
LSE112BXHGKPS
📏 Dimensions on request
MSE511BXHFRSS
📏 Dimensions on request
HCT215-48
📏 Dimensions on request
HCT212-38
📏 Dimensions on request