QMCW30J150S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TTU-TRB-3 1/2-ECO
Ball Bearing Units · Dimensions on request
42 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TTU-TRB-3 1/2-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 42 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 42 lb |
| Catalogue Ref. | GLbkO66e5R |
| C0 Static Load Rating | 108600 lb |
| Dimension A | 2-1/2 in |
| Dimension A1 | 2-1/2 in |
| Dimension Ac | 4.Series 8 in |
| Dimension B | Series 5 in |
| Dimension H | Series 9-Series 5/Series 8 in |
| Dimension H1 | Series 8-Series 5/16 in |
| Dimension L | Series 9-1/2 in |
| Dimension L1 | Series 9 in |
| Dimension L2 | 4.46 in |
| Dimension Series H2 | 4.05 in |
| Dimension d1 | Series 5-17/Series 32 in |
| Dimension d2 | 6.7 in |
| Housing Width | 3-1/2 in |
| K Factor | 1.19 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 3.5 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-3 1/2 |
| UPC Code | 0883450508285 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.71 |
| Y (if Fa/Fr > e) | 2.07 |
| e | 0.50 |
1109KRRB
📏 Dimensions on request
QMCW18J304S
📏 Dimensions on request
UCFL320-64
📏 Dimensions on request
UKF218 - H2318
📏 Dimensions on request
V215C110-0 2
📏 Dimensions on request
E-P2B-TRB-90MM-ECC
📏 Dimensions on request
QVFC15V065S
📏 Dimensions on request
FSNT 511-609 - 21309K - TA609
📏 Dimensions on request
QVFK20V090S
📏 Dimensions on request
QAAPX20A315S
📏 Dimensions on request
UCPF207-21
📏 Dimensions on request
UCPF208
📏 Dimensions on request
UCPF206-19
📏 Dimensions on request