
SDAF 23184K 15-3/4
📏 Dimensions on request



Ball Bearing Units · Dimensions on request
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 9.0 lb |
| Catalogue Ref. | 5mQLyJcMdY |
| Bolt Diameter | 7/16 in |
| C0 Static Load Rating | 33000 lb |
| Dimension A | 2-25/32 in |
| Dimension A1 | 1/2 in |
| Dimension A2 | 1-1/32 in |
| Dimension A3 | 1-1/16 in |
| Dimension Ac | 3.76325 in |
| Dimension B | 3-3/8 in |
| Dimension E | 1-9/16 in |
| Dimension H | 6-1/8 in |
| Dimension J | 5-1/8 in |
| Dimension N2 | 3.620 in |
| Dimension d1 | 3-3/16 in |
| Dimension d2 | 3.95 in |
| K Factor | 1.36 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 40 mm1.575 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-C |
| UPC Code | 0883450504805 - Assembly is not orderable, contact Customer Service. |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.96 |
| Y (if Fa/Fr > e) | 2.37 |
| e | 0.44 |

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request

📏 Dimensions on request