MSE412BXHF
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-PF-TRB-100MM-ECC
Ball Bearing Units · Dimensions on request
58.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-PF-TRB-100MM-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 58.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 58.0 lb |
| Catalogue Ref. | qCSOXXbKcG |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 154000 lb |
| Dimension A | 4-1/2 in |
| Dimension A1 | 1 in |
| Dimension A2 | 1-13/16 in |
| Dimension A3 | 1-1/2 in |
| Dimension Ac | 5.825 in |
| Dimension B | 6-1/4 in |
| Dimension E | 2-11/16 in |
| Dimension H | 10-7/8 in |
| Dimension J | 9-3/8 in |
| Dimension N2 | 6.630 in |
| Dimension d1 | 6-1/16 in |
| Dimension d2 | 7.43 in |
| K Factor | 1.23 |
| Nose Bore Diameter | 6.37 in |
| Nose Diameter | 7.69 in |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 100 mm3.937 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-I |
| UPC Code | 0883450504584 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.77 |
| Y (if Fa/Fr > e) | 2.14 |
| e | 0.49 |
UELT209
📏 Dimensions on request
SNT 512-610 - 22310K - TA610/ 1-3/4
📏 Dimensions on request
E-PF-TRB-60MM-ECC
📏 Dimensions on request
UKFX12D1;H2312X
📏 Dimensions on request
TAK 25
📏 Dimensions on request
HSM175BRHFATL
📏 Dimensions on request
FSNT 526 - 23226K - TA526
📏 Dimensions on request
GY1107KRRB SGT
📏 Dimensions on request
SNTD 3136 - 23136K - LO36
📏 Dimensions on request
UKFCX10D1;H2310X
📏 Dimensions on request
FSNT 517 - 22314 - VR314
📏 Dimensions on request
SBP206-20
📏 Dimensions on request