SAF 22522 4
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-PF-TRB-1 7/8
Ball Bearing Units · Dimensions on request
10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-PF-TRB-1 7/8 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 10 lb |
| Catalogue Ref. | 94mGn7776X |
| Bolt Diameter | 7/16 in |
| C0 Static Load Rating | 43000 lb |
| Dimension A | 2-29/32 in |
| Dimension A1 | 9/16 in |
| Dimension A2 | 1-1/32 in |
| Dimension A3 | 1-3/16 in |
| Dimension B | 3-1/2 in |
| Dimension E | 1-9/16 in |
| Dimension H | 6-3/8 in |
| Dimension J | 5-3/8 in |
| Dimension N2 | 3.800 in |
| Dimension d1 | 3-7/16 in |
| K Factor | 1.83 |
| Nose Bore Diameter | 3.5 in |
| Nose Diameter | 4.36 in |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.875 in |
| Shaft Size Type | Imperial |
| UPC Code | 053893778662 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.Series 64 |
| Y (if Fa/Fr > e) | 3.18 |
| e | 0.33 |
SAF 22324
📏 Dimensions on request
QAAFY15A212S
📏 Dimensions on request
SUCBF209/F
📏 Dimensions on request
QVPA13V204S
📏 Dimensions on request
SUCBFB206-19/FVSL613
📏 Dimensions on request
E-P4B-TRB-65MM-ECO/ECC
📏 Dimensions on request
QAAMC18A090S
📏 Dimensions on request
YAS 40 SGT
📏 Dimensions on request
E-4BF-TRB-2 1/2
📏 Dimensions on request
MSE511BXHFATL
📏 Dimensions on request
SUCSF206-20/F
📏 Dimensions on request
UCFL314
📏 Dimensions on request
SUCAFL206-20/F
📏 Dimensions on request