69790400222
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-PF-TRB-1 3/8
Ball Bearing Units · Dimensions on request
7.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-PF-TRB-1 3/8 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 7.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.0 lb |
| Catalogue Ref. | ArVbYT625C |
| Bolt Diameter | 3/Series 8 in |
| C0 Static Load Rating | 26000 lb |
| Dimension A | 2-15/Series 32 in |
| Dimension A1 | 1/2 in |
| Dimension A2 | 1-1/Series 32 in |
| Dimension A3 | 7/Series 8 in |
| Dimension B | 3 in |
| Dimension E | 1-1/2 in |
| Dimension H | Series 5-1/4 in |
| Dimension J | 4-3/Series 8 in |
| Dimension N2 | 3.090 in |
| Dimension d1 | 2-3/4 in |
| K Factor | 1.31 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.375 in |
| Shaft Size Type | Imperial |
| UPC Code | 053893778266 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.89 |
| Y (if Fa/Fr > e) | 2.28 |
| e | 0.46 |
QMFL18J307S
📏 Dimensions on request
SUCST210-32/F
📏 Dimensions on request
NAU4LKSTB208-25
📏 Dimensions on request
LSM90BXHF
📏 Dimensions on request
QAAPL18A090S
📏 Dimensions on request
FSNT 516-613 - 22313K - LO613
📏 Dimensions on request
TAPG22K100S
📏 Dimensions on request
VJ-PDNB 218
📏 Dimensions on request
E-P4B-TRB-2 1/2
📏 Dimensions on request
SAT204-12
📏 Dimensions on request
SAT204
📏 Dimensions on request
SAT207-22
📏 Dimensions on request
SAT205-15
📏 Dimensions on request