MSE303BRHFATL
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-3 1/4-ECO
Ball Bearing Units · Dimensions on request
46.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-3 1/4-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 46.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 46.0 lb |
| Catalogue Ref. | uybIhI9Yau |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 108600 lb |
| Dimension A | 4-1/2 in |
| Dimension Ac | 5.8 in |
| Dimension B | 5 in |
| Dimension H | 3-3/4 in |
| Dimension H1 | 2-1/4 in |
| Dimension H2 | 7-1/2 in |
| Dimension J Max. | 11-1/4 in |
| Dimension J Min. | 10-3/4 in |
| Dimension L | 13-1/2 in |
| Dimension N | 15/16 in |
| Dimension N1 | 1-3/16 in |
| Dimension N2 | 2-3/8 in |
| Dimension d1 | 5-17/32 in |
| Dimension d2 | 6.7 in |
| K Factor | 1.19 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 3.25 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-3 1/4 |
| UPC Code | 0883450507547 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.71 |
| Y (if Fa/Fr > e) | 2.07 |
| e | 0.50 |
SN 518 2
📏 Dimensions on request
TAPG15K065S
📏 Dimensions on request
UELFL211-34
📏 Dimensions on request
QAAC20A315S
📏 Dimensions on request
HSM150BRHFATL
📏 Dimensions on request
UCF206-20
📏 Dimensions on request
UCP311-35
📏 Dimensions on request
QVVFY19V085S
📏 Dimensions on request
RAS 7/8
📏 Dimensions on request
TAFC17K300S
📏 Dimensions on request
SUCSF209-27/F
📏 Dimensions on request
SUCBT205/F
📏 Dimensions on request
LSE503BRHFRSS
📏 Dimensions on request