QAAC18A080S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-2 3/4
Ball Bearing Units · Dimensions on request
29 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-2 3/4 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 29 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 29 lb |
| Catalogue Ref. | zO2qbo5E59 |
| Bolt Diameter | 5/8 in |
| C0 Static Load Rating | 61200 lb |
| Dimension A | 4 in |
| Dimension B | 4-1/2 in |
| Dimension H | 3-1/8 in |
| Dimension H1 | 1-7/8 in |
| Dimension H2 | 6-1/4 in |
| Dimension J Max. | 9-13/16 in |
| Dimension J Min. | 9-3/16 in |
| Dimension L | 12 in |
| Dimension N | 11/16 in |
| Dimension N1 | 1 in |
| Dimension N2 | 2-1/8 in |
| Dimension d1 | 4-23/32 in |
| K Factor | 1.30 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 2.75 in |
| Shaft Size Type | Imperial |
| UPC Code | 053893607597 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.87 |
| Y (if Fa/Fr > e) | 2.26 |
| e | 0.46 |
SD 640
📏 Dimensions on request
SR 120x14
📏 Dimensions on request
E-TTU-TRB-60MM-ECO
📏 Dimensions on request
E-PF-TRB-75MM-ECC
📏 Dimensions on request
QVVFY28V125S
📏 Dimensions on request
MSE600BRHFATL
📏 Dimensions on request
C-UKF205D1;H2305X
📏 Dimensions on request
TU-3x18
📏 Dimensions on request
UEL215-47
📏 Dimensions on request
GY1009KRRB
📏 Dimensions on request
EOP-U206-20
📏 Dimensions on request
MSE300BRHFKPS
📏 Dimensions on request
QACW11A055S
📏 Dimensions on request