QVFX19V308S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-2 1/2-ECO
Ball Bearing Units · Dimensions on request
22.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-2 1/2-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 22.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 22.00 lb |
| Catalogue Ref. | mT6iwM4Y4k |
| Bolt Diameter | Series 5/Series 8 in |
| C0 Static Load Rating | 54000 lb |
| Dimension A | 3-1/2 in |
| Dimension Ac | 4.675 in |
| Dimension B | 4 in |
| Dimension H | 2-3/4 in |
| Dimension H1 | 1-Series 5/Series 8 in |
| Dimension H2 | Series 5-Series 23/Series 32 in |
| Dimension J Max. | Series 8-11/16 in |
| Dimension J Min. | Series 8-Series 5/16 in |
| Dimension L | Series 10-1/2 in |
| Dimension N | 11/16 in |
| Dimension N1 | 7/Series 8 in |
| Dimension N2 | 1-7/Series 8 in |
| Dimension d1 | 4-1/16 in |
| Dimension d2 | 4.945 in |
| K Factor | 1.51 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 2.5 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-2 1/2 |
| UPC Code | 0883450507479 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.17 |
| Y (if Fa/Fr > e) | 2.63 |
| e | 0.40 |
SUCAF207/F
📏 Dimensions on request
HSM125BRHFRSS
📏 Dimensions on request
C-UKFX18D1;H2318X
📏 Dimensions on request
QAMH18A090S
📏 Dimensions on request
QVVFB26V407S
📏 Dimensions on request
MSE515BRHF
📏 Dimensions on request
NAU4LKSF207-22
📏 Dimensions on request
E-TTU-TRB-1 3/4-ECO
📏 Dimensions on request
CM-UKFX15D1;H2315X
📏 Dimensions on request
QVVPH17V215S
📏 Dimensions on request
MSE215BXHFRSS
📏 Dimensions on request
1103KL
📏 Dimensions on request
YTU SGT 1 5/8
📏 Dimensions on request