SUCBT206-19/FVSL613
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-125MM
Ball Bearing Units · Dimensions on request
132.000 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-125MM is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 132.000 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 132.000 lb |
| Catalogue Ref. | t8lKoY2s1d |
| Bolt Diameter | 7/Series 8 in |
| C0 Static Load Rating | 266000 lb |
| Dimension A | Series 5-1/Series 8 in |
| Dimension B | 7-1/4 in |
| Dimension H | Series 5-1/2 in |
| Dimension H1 | 3 in |
| Dimension H2 | Series 10-7/Series 8 in |
| Dimension J Max. | 15-3/4 in |
| Dimension J Min. | 15-1/4 in |
| Dimension L | 18-1/2 in |
| Dimension N | 1 in |
| Dimension N1 | 1-1/4 in |
| Dimension N2 | 2-7/Series 8 in |
| Dimension d1 | 7-1/2 in |
| K Factor | 1.27 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 125 mm4.921 in |
| Shaft Size Type | Metric |
| UPC Code | 053893775647 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.83 |
| Y (if Fa/Fr > e) | 2.21 |
| e | 0.47 |
QVCW19V307S
📏 Dimensions on request
QVSN16V075S
📏 Dimensions on request
FSNT 515-612 - 21312 - LO312
📏 Dimensions on request
HSE612BRHFATL
📏 Dimensions on request
SUCAF204/F
📏 Dimensions on request
QMFX15J300S
📏 Dimensions on request
NAU4LKSTB206-18
📏 Dimensions on request
E40KPPB3
📏 Dimensions on request
SDAF 23280
📏 Dimensions on request
UCFL208-25
📏 Dimensions on request
NAU4LKBT210-30
📏 Dimensions on request
HSM150BXHFKPS
📏 Dimensions on request
FSNT 210 - 22210 - LO210
📏 Dimensions on request