LCJT 1 1/4 S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-125MM-ECO/ECO
Ball Bearing Units · Dimensions on request
132.000 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-125MM-ECO/ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 132.000 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 132.000 lb |
| Catalogue Ref. | qvqfqsdfey |
| Bolt Diameter | 7/Series 8 in |
| C0 Static Load Rating | 266000 lb |
| Dimension A | Series 5-1/Series 8 in |
| Dimension Ac | Series 8.413 in |
| Dimension B | 7-1/4 in |
| Dimension H | Series 5-1/2 in |
| Dimension H1 | 3 in |
| Dimension H2 | Series 10-7/Series 8 in |
| Dimension J Max. | 15-3/4 in |
| Dimension J Min. | 15-1/4 in |
| Dimension L | 18-1/2 in |
| Dimension N | 1 in |
| Dimension N1 | 1-1/4 in |
| Dimension N2 | 2-7/Series 8 in |
| Dimension d1 | 7-1/2 in |
| Dimension d2 | Series 10.35 in |
| K Factor | 1.27 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 125 mm4.921 in |
| Shaft Size Type | Metric |
| Type E Open Cover Number | EUDR-125MM |
| UPC Code | 0883450509091 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.83 |
| Y (if Fa/Fr > e) | 2.21 |
| e | 0.47 |
SN 605
📏 Dimensions on request
1014KLL
📏 Dimensions on request
V110C55-0
📏 Dimensions on request
SN 324C
📏 Dimensions on request
FSNT 532 - 22232K - TSNG532
📏 Dimensions on request
UCFL205-14
📏 Dimensions on request
QAATU15A215S
📏 Dimensions on request
SAF 22526
📏 Dimensions on request
QVPL22V100S
📏 Dimensions on request
SUCAF210-31/FVSL613
📏 Dimensions on request
QVP16V075S
📏 Dimensions on request
YCJTM 2
📏 Dimensions on request
E-P2B-TRB-2 15/16-ECO/ECC
📏 Dimensions on request