HSM180BXHF
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-125MM-ECO/ECC
Ball Bearing Units · Dimensions on request
132.000 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-125MM-ECO/ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 132.000 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 132.000 lb |
| Catalogue Ref. | stsRlidfey |
| Bolt Diameter | 7/Series 8 in |
| C0 Static Load Rating | 266000 lb |
| Dimension A | Series 5-1/Series 8 in |
| Dimension Ac | Series 8.Series 313 in |
| Dimension B | 7-1/4 in |
| Dimension H | Series 5-1/2 in |
| Dimension H1 | 3 in |
| Dimension H2 | Series 10-7/Series 8 in |
| Dimension J Max. | 15-3/4 in |
| Dimension J Min. | 15-1/4 in |
| Dimension L | 18-1/2 in |
| Dimension N | 1 in |
| Dimension N1 | 1-1/4 in |
| Dimension N2 | 2-7/Series 8 in |
| Dimension d1 | 7-1/2 in |
| Dimension d2 | Series 10.35 in |
| K Factor | 1.27 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 125 mm4.921 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-K |
| Type E Open Cover Number | EUDR-125MM |
| UPC Code | 0883450505864 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.83 |
| Y (if Fa/Fr > e) | 2.21 |
| e | 0.47 |
SNT 526 - 22226 - VR226
📏 Dimensions on request
V310C150-0 2
📏 Dimensions on request
QMF22J110S
📏 Dimensions on request
NAU4LKSP209
📏 Dimensions on request
QVVPA17V070S
📏 Dimensions on request
FSNT 524-620 - 22320 - TSNG320
📏 Dimensions on request
FSNT 530 - 23230 - LO230
📏 Dimensions on request
MSM155BXHF
📏 Dimensions on request
QAC15A070S
📏 Dimensions on request
LSE211BXHFATL
📏 Dimensions on request
SNTD 3040 - 23040K - TA40
📏 Dimensions on request
NAU4LKAFB210-30
📏 Dimensions on request
SUCSFL206-19/FVSL613
📏 Dimensions on request