QMPL10J050S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-55MM-ECO
Ball Bearing Units · Dimensions on request
15.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-55MM-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 15.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 15.0 lb |
| Catalogue Ref. | zj3uUJ6R6E |
| Bolt Diameter | Series 5/Series 8 in |
| C0 Static Load Rating | 48200 lb |
| Dimension A | 2-Series 5/Series 8 in |
| Dimension Ac | 3.Series 8 in |
| Dimension B | 3-3/4 in |
| Dimension H | 2-1/2 in |
| Dimension H1 | 1-1/2 in |
| Dimension H2 | Series 5 in |
| Dimension J Max. | 7-7/Series 8 in |
| Dimension J Min. | 7-Series 5/Series 8 in |
| Dimension L | Series 9-Series 5/Series 8 in |
| Dimension N | 3/4 in |
| Dimension N1 | 7/Series 8 in |
| Dimension d1 | 3-3/4 in |
| Dimension d2 | 4.7 in |
| K Factor | 1.65 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 55 mm2.165 in |
| Shaft Size Type | Metric |
| Type E Open Cover Number | EUDR-55MM |
| UPC Code | 0883450507356 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.38 |
| Y (if Fa/Fr > e) | 2.87 |
| e | 0.36 |
MSE708BXHF
📏 Dimensions on request
FSAF 22617 2-7/8
📏 Dimensions on request
QMPL09J112S
📏 Dimensions on request
QAFY18A303S
📏 Dimensions on request
1110KLLB
📏 Dimensions on request
MSM75BRHFATL
📏 Dimensions on request
MSE908BXHF
📏 Dimensions on request
SUCBFB210-31/F
📏 Dimensions on request
SD 540
📏 Dimensions on request
QACW13A060S
📏 Dimensions on request
UCP207-20
📏 Dimensions on request
SDAF 22324
📏 Dimensions on request
E-TU-TRB-2 7/16-ECC
📏 Dimensions on request