LSM45BRHFHTPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-2 7/16-ECO
Ball Bearing Units · Dimensions on request
Series 23 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-2 7/16-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 23 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 23 lb |
| Catalogue Ref. | 88CZQ96U6H |
| Bolt Diameter | Series 5/Series 8 in |
| C0 Static Load Rating | 54000 lb |
| Dimension A | 2-7/Series 8 in |
| Dimension Ac | 4.05 in |
| Dimension B | 4 in |
| Dimension H | 2-3/4 in |
| Dimension H1 | 1-Series 5/Series 8 in |
| Dimension H2 | Series 5-Series 23/Series 32 in |
| Dimension J Max. | Series 8-Series 5/Series 8 in |
| Dimension J Min. | Series 8-3/Series 8 in |
| Dimension L | Series 10-1/2 in |
| Dimension N | 3/4 in |
| Dimension N1 | 7/Series 8 in |
| Dimension d1 | 4-1/16 in |
| Dimension d2 | 4.945 in |
| K Factor | 1.51 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 2.4375 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-2 7/16 |
| UPC Code | 0883450507240 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.17 |
| Y (if Fa/Fr > e) | 2.63 |
| e | 0.40 |
UKP212 - HS2312
📏 Dimensions on request
QATU18A303S
📏 Dimensions on request
MSM180BXHFATL
📏 Dimensions on request
MSM135BXHFATL
📏 Dimensions on request
E-4BF-TRB-2-ECC
📏 Dimensions on request
LSE211BRHF
📏 Dimensions on request
QVVFY26V115S
📏 Dimensions on request
UCT313
📏 Dimensions on request
QAFL18A308S
📏 Dimensions on request
QAAPXT13A208S
📏 Dimensions on request
QVFY19V080S
📏 Dimensions on request
MSE303BXHFHTPS
📏 Dimensions on request
LSM110BRHF
📏 Dimensions on request