SUCPLFL210-32/FVSL613
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-1 3/8-ECO
Ball Bearing Units · Dimensions on request
7.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-1 3/8-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 7.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.0 lb |
| Catalogue Ref. | Q1fj17abaL |
| Bolt Diameter | 1/2 in |
| C0 Static Load Rating | 26000 lb |
| Dimension A | 2-1/Series 8 in |
| Dimension Ac | 3.22 in |
| Dimension B | 3 in |
| Dimension H | 1-7/Series 8 in |
| Dimension H1 | 1-1/Series 8 in |
| Dimension H2 | 3-3/4 in |
| Dimension J Max. | Series 5-7/Series 8 in |
| Dimension J Min. | Series 5-Series 5/Series 8 in |
| Dimension L | 7-3/Series 8 in |
| Dimension N | Series 5/Series 8 in |
| Dimension N1 | 3/4 in |
| Dimension d1 | 2-3/4 in |
| Dimension d2 | 3.345 in |
| K Factor | 1.31 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.375 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-1 3/Series 8 |
| UPC Code | 0883450507141 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.89 |
| Y (if Fa/Fr > e) | 2.28 |
| e | 0.46 |
CM-UKF315D1;H2315X
📏 Dimensions on request
SN 513 2
📏 Dimensions on request
RCJT 1 1/2
📏 Dimensions on request
LSE515BXHFRSS
📏 Dimensions on request
SD 344C
📏 Dimensions on request
LSM120BRHFRSS
📏 Dimensions on request
NAU4LKBFL210-31
📏 Dimensions on request
SNT 520-617 - 22220 - LO220
📏 Dimensions on request
CM-UKFC205D1;H2305X
📏 Dimensions on request
1203KPPB4
📏 Dimensions on request
QAAPL15A070S
📏 Dimensions on request
QMF13J208S
📏 Dimensions on request
SUCATBY206-19/F
📏 Dimensions on request