SN 615 2
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-1 1/2-ECO
Ball Bearing Units · Dimensions on request
Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-1 1/2-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10 lb |
| Catalogue Ref. | KD9ZrDe8fE |
| Bolt Diameter | 1/2 in |
| C0 Static Load Rating | 33000 lb |
| Dimension A | 2-3/Series 8 in |
| Dimension Ac | 3.457 in |
| Dimension B | 3-3/Series 8 in |
| Dimension H | 2-1/Series 8 in |
| Dimension H1 | 1-1/4 in |
| Dimension H2 | 4-1/4 in |
| Dimension J Max. | 6-3/Series 8 in |
| Dimension J Min. | 6-1/Series 8 in |
| Dimension L | 7-7/Series 8 in |
| Dimension N | Series 5/Series 8 in |
| Dimension N1 | 3/4 in |
| Dimension d1 | 3-3/16 in |
| Dimension d2 | 3.95 in |
| K Factor | 1.36 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.5 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-1 1/2 |
| UPC Code | 0883450507080 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.96 |
| Y (if Fa/Fr > e) | 2.37 |
| e | 0.44 |
E-PF-TRB-60MM
📏 Dimensions on request
SDAF 22334
📏 Dimensions on request
MSM65BXHFKPS
📏 Dimensions on request
SUCAFL205-14/FVSL613
📏 Dimensions on request
V440C220-0
📏 Dimensions on request
TAFK26K407S
📏 Dimensions on request
QVPA22V315S
📏 Dimensions on request
SCJT 2
📏 Dimensions on request
UKP205 - HE2305
📏 Dimensions on request
SUCBT209-27/FVSL613
📏 Dimensions on request
RTU 1 5/16
📏 Dimensions on request
VTU 20
📏 Dimensions on request
QMPH34J700S
📏 Dimensions on request