SDAF 23168K 12-7/16
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-4BF-TRB-55MM-ECC
Ball Bearing Units · Dimensions on request
15.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-4BF-TRB-55MM-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 15.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 15.0 lb |
| Catalogue Ref. | EAOzgkelfU |
| Bolt Diameter | 5/8 in |
| C0 Static Load Rating | 48200 lb |
| Dimension A | 3-9/32 in |
| Dimension A1 | 1-3/8 in |
| Dimension A2 | 1/8 in |
| Dimension Ac | 4.35625 in |
| Dimension B | 3-3/4 in |
| Dimension J | 4-7/8 in |
| Dimension L | 6-1/4 in |
| Dimension d1 | 3-3/4 in |
| Dimension d2 | 4.7 in |
| K Factor | 1.65 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 55 mm2.165 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-E |
| UPC Code | 0883450503778 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.38 |
| Y (if Fa/Fr > e) | 2.87 |
| e | 0.36 |
MSE708BRHFATL
📏 Dimensions on request
QVFY16V070S
📏 Dimensions on request
TAPA11K050S
📏 Dimensions on request
SUCBP210-30/FVSL613
📏 Dimensions on request
V580C340-0 2
📏 Dimensions on request
QAAPX26A415S
📏 Dimensions on request
YCJM2 3/16
📏 Dimensions on request
GY1104KRRB SGT
📏 Dimensions on request
QACW13A208S
📏 Dimensions on request
1015KL
📏 Dimensions on request
E-P4B-TRB-2 7/16-ECO/ECC
📏 Dimensions on request
NAU4LKPLP205
📏 Dimensions on request
QMPG30J600S
📏 Dimensions on request