E-P4B-TRB-125MM-ECC
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN DVPF22K315S
Ball Bearing Units · Dimensions on request
38.6 Kg85 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN DVPF22K315S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 38.6 Kg85 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 38.6 Kg85 lb |
| Catalogue Ref. | SmcR7y5n4O |
| Adapter Sleeve Axial Movement Max | 1.067 mm0.042 in |
| Adapter Sleeve Axial Movement Min | 0.762 mm0.03 in |
| Bearing Number | 22222 |
| C - Dynamic Load (Basic) | 125000 lb555 kN |
| C0 - Static Load | 147000 lb653 kN |
| Dimension A | 108.0 mm4.25 in |
| Dimension B | Series 223 mmSeries 8.780 in |
| Dimension C | 145 mm5.71 in |
| Dimension D Max | 339.9 mm13.38 in |
| Dimension D Min | 276.4 mmSeries 10.88 in |
| Dimension E | 57.2 mm2.25 in |
| Dimension F | 378.0 mm14.88 in |
| Dimension H | 35.6 mm1.40 in |
| Dimension J (Bolt Size) | Series 20 mm0.750 in |
| Dimension L | 110.7 mm4.36 in |
| Dimension S | 104.9 mm4.13 in |
| Dimension Series G | 109.50 mm4.310 in |
| Dimension Series M | Series 63 mm2.48 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | DVPF22K315ST |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - Series M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.071 mm0.0028 in |
| Int Radial Clearance Reduction Min | 0.051 mm0.0020 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Oil Lubrication - Series M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Post Install Int Radial Clearance Min | 0.064 mm0.0025 in |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 3-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450273893 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| e - Geometry Factor | 0.25 |
UCFL204
📏 Dimensions on request
SUCAP204-12/FVSL613
📏 Dimensions on request
LSE115BXHGRSS
📏 Dimensions on request
QVFNL22V400S
📏 Dimensions on request
SAF 22524 4-1/16
📏 Dimensions on request
SAF 23034K 6
📏 Dimensions on request
1108KL
📏 Dimensions on request
NAU4LKST207-20
📏 Dimensions on request
RCJO1 11/16
📏 Dimensions on request
QMP13J208S
📏 Dimensions on request
VJ-PDNB 216
📏 Dimensions on request
1113KPPB3
📏 Dimensions on request
SUCPLF208/FVSL613
📏 Dimensions on request