SAF 23026K 4-3/8
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN DVPF17K215S
Ball Bearing Units · Dimensions on request
23.Series 10 Kg51 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN DVPF17K215S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 23.Series 10 Kg51 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 23.Series 10 Kg51 lb |
| Catalogue Ref. | uc0Xlgb8bV |
| Adapter Sleeve Axial Movement Max | 0.965 mm0.038 in |
| Adapter Sleeve Axial Movement Min | 0.686 mm0.027 in |
| Bearing Number | 22217 |
| C - Dynamic Load (Basic) | 66900 lb297 kN |
| C0 - Static Load | 71900 lb320 kN |
| Dimension A | 82.6 mm3.25 in |
| Dimension B | 172.5 mm6.79 in |
| Dimension C | 110 mm4.Series 33 in |
| Dimension D Max | 231.1 mm9.Series 10 in |
| Dimension D Min | 193.0 mm7.60 in |
| Dimension E | 47.Series 8 mm1.88 in |
| Dimension F | 265.2 mmSeries 10.44 in |
| Dimension H | Series 32.Series 8 mm1.29 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 86.6 mm3.41 in |
| Dimension S | 82 mm3.23 in |
| Dimension Series G | 79.50 mm3.130 in |
| Dimension Series M | 49.Series 8 mm1.96 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | DVPF17K215ST |
| Grease Lubrication - B/C/O Seal | 1100 rpm |
| Grease Lubrication - Series M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.064 mm0.0025 in |
| Int Radial Clearance Reduction Min | 0.046 mm0.0018 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1100 rpm |
| Oil Lubrication - Series M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Post Install Int Radial Clearance Min | 0.051 mm0.0020 in |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.109 mm0.0043 in |
| Shaft Size | 2-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450273831 |
| Y1 - Geometry Factor | 3.07 |
| Y2 - Geometry Factor | 4.57 |
| e - Geometry Factor | 0.22 |
SUCSFL206-20/F
📏 Dimensions on request
GYE15KRRB
📏 Dimensions on request
FSNT 522-619 - 22319K - TSNG619
📏 Dimensions on request
MSE1100BXHFATL
📏 Dimensions on request
LSM40BXHF
📏 Dimensions on request
E45KPPB4
📏 Dimensions on request
E-P2B-TRB-40MM-ECO
📏 Dimensions on request
VAS 1 5/8
📏 Dimensions on request
SUCST207-23/F
📏 Dimensions on request
E-4BF-TRB-3 7/16-ECC
📏 Dimensions on request
QVVTU19V085S
📏 Dimensions on request
LSE808BRHFATL
📏 Dimensions on request
SUCAP204/FVSL613
📏 Dimensions on request