QVVPN17V300S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN DVP13K060S
Ball Bearing Units · Dimensions on request
9.Series 10 KgSeries 20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN DVP13K060S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 9.Series 10 KgSeries 20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 9.Series 10 KgSeries 20 lb |
| Catalogue Ref. | PEqAKj3C2D |
| Adapter Sleeve Axial Movement Max | 0.6 mm0.022 in |
| Adapter Sleeve Axial Movement Min | 0.5 mm0.018 in |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 46400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 63.5 mm2.50 in |
| Dimension B | 138.9 mm5.47 in |
| Dimension C | 85.1 mm3.35 in |
| Dimension D Max | 199.9 mm7.87 in |
| Dimension D Min | 165.1 mm6.50 in |
| Dimension F | 244.6 mm9.63 in |
| Dimension H | Series 32.Series 8 mm1.29 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 74.9 mm2.95 in |
| Dimension S | 65 mm2.56 in |
| Dimension Series G | 70.60 mm2.780 in |
| Dimension Series M | 39.6 mm1.56 in |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | DVP13K060ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - Series M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.038 mm0.0015 in |
| Int Radial Clearance Reduction Min | 0.030 mm0.0012 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - Series M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Post Install Int Radial Clearance Min | 0.038 mm0.0015 in |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | Series 60 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450273398 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
QMCW15J211S
📏 Dimensions on request
QVVTU14V065S
📏 Dimensions on request
QAAF20A315S
📏 Dimensions on request
SUCSTB210-31/F
📏 Dimensions on request
SUCATBY208/F
📏 Dimensions on request
HSE912BRHFRSS
📏 Dimensions on request
1101KL
📏 Dimensions on request
QACW20A100S
📏 Dimensions on request
QVVFK22V400S
📏 Dimensions on request
SNT 509 - 22209K - TA509/ 1-7/16
📏 Dimensions on request
UELT207-20
📏 Dimensions on request
QVMC17V075S
📏 Dimensions on request
QAF10A200S
📏 Dimensions on request