Name: TIMKEN 69790499139
Brand: TIMKEN
SKU: cgCYgS919j

TIMKEN 69790499139

Ball Bearing Units · Dimensions on request

14.80 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 69790499139 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 14.80 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Ball Bearing Units

Type

Ball Bearing Units

Dimensions (d × D × B)

Dimensions on request

Weight

14.80 lb

Catalogue Ref.

cgCYgS919j

AISE Motor Frame Size

612/812

Bore Size (Dimension TB)

3.6230 to 3.6240 in

Color

Metallic

Coupling Type

Gear

Cubic inches

107.18450 in3

Dimension FD

212.85 mm8.38 in

Dimension HD

117.60 mm4.630 in

Features

Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames

Hub Material

AISI 1045

Hub Style

Exposed Bolt

Keyway Size (W x D)

3/4 x 1/4 in

Max. Bore (Dimensions ID1/ID2)

85 mm3.250 in

Max. Speed (Balanced)

6600.00 rpm

Max. Speed (Unbalanced)

4400 rpm

Nominal Torque

56700 in·lb

Notes

Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff.

Set Screw Style Coupling Size (Dimension T)

No Setscrew

Size

2 1/2

Style

Mill Motor Hub Bored

Type

Gear Coupling Hubs