Name: TIMKEN 69790498590
Brand: TIMKEN
SKU: wMMPyoenfW

TIMKEN 69790498590

Custom & Special Bearings · Dimensions on request

0.90 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 69790498590 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.90 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.90 lb

Catalogue Ref.

wMMPyoenfW

Application

Internal Shaft Locking Device

Collar Material

Silver/Metallic

Coupling Size

SLD350 S

Cubic inches

500.650Series 64 mm³19.71066 in3

Features

Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer

Hub Outside Diameter (Dimension d)

110.00 mm4.331 in

Max. Transmissible Axial Force

20059.00 lbf

Max. Transmissible Torque

3620.00 ft·lb

Preload Force Required to Generate Max. Transmissible Torque (FA)

96893.00 lb

Pressure on The Hub

13053.00 psi

Pressure on The Shaft

16099.00 psi