457 - 453X
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498541
Custom & Special Bearings · Dimensions on request
1.87 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498541 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.87 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.87 lb |
| Catalogue Ref. | U7c2BX5V5u |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Coupling Size | SLD350 |
| Cubic inches | 950.397Series 64 mm³37.41723 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 130.00 mm5.118 in |
| Max. Transmissible Axial Force | 32066.00 lbf |
| Max. Transmissible Torque | 6838.00 ft·lb |
| Preload Force Required to Generate Max. Transmissible Torque (FA) | 154893.00 lb |
| Pressure on The Hub | 13053.00 psi |
| Pressure on The Shaft | 16099.00 psi |
| Recommended Distance to Clamp Device - 1 Element (Dimension N) | 0.236 in |
| Recommended Distance to Clamp Device - 2 Elements (Dimension N) | 0.276 in |
| Recommended Distance to Clamp Device - 3 Elements (Dimension N) | 0.354 in |
| Recommended Distance to Clamp Device - 4 Elements (Dimension N) | 0.433 in |
| Screw Material | Steel |
| Shaft Locking Device Outside Diameter (Dimension D) | 148.00 mm5.827 in |
| Shaft Size | 130 x 148 mm |
| Style | Low Torque |
| Tolerance of Hub Bore (T2) | -0 +0.0016 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 27.99 mm1.102 in |
| Type | Internal |
K 89×97×40ZWANDGEDimensions on request
68514427827
📏 Dimensions on request
68514431583
📏 Dimensions on request
68514445463
📏 Dimensions on request
HSM440BXHSHTPS
📏 Dimensions on request
68514458044
📏 Dimensions on request
69790492507
📏 Dimensions on request
G1113KPPB3
📏 Dimensions on request
68514462027
📏 Dimensions on request
LFS120-E
📏 Dimensions on request
LSE507BXHSNA
📏 Dimensions on request
MSM270BXHSRSS
📏 Dimensions on request
68514436175
📏 Dimensions on request