LSE900BRHFRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498527
Custom & Special Bearings · Dimensions on request
0.11 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498527 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.11 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.11 lb |
| Catalogue Ref. | NjDg3B9San |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Coupling Size | SLD350 |
| Cubic inches | 76.13368 mm³2.99739 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 56.00 mm2.205 in |
| Max. Transmissible Axial Force | 5048.00 lbf |
| Max. Transmissible Torque | 4Series 64.00 ft·lb |
| Preload Force Required to Generate Max. Transmissible Torque (FA) | 25741.00 lb |
| Pressure on The Hub | 14504.00 psi |
| Pressure on The Shaft | 16099.00 psi |
| Recommended Distance to Clamp Device - 1 Element (Dimension N) | 0.157 in |
| Recommended Distance to Clamp Device - 2 Elements (Dimension N) | 0.197 in |
| Recommended Distance to Clamp Device - 3 Elements (Dimension N) | 0.236 in |
| Recommended Distance to Clamp Device - 4 Elements (Dimension N) | 0.276 in |
| Screw Material | Steel |
| Shaft Locking Device Outside Diameter (Dimension D) | Series 64.00 mm2.520 in |
| Shaft Size | 56 x Series 64 mm |
| Style | Low Torque |
| Tolerance of Hub Bore (T2) | -0 +0.0012 in |
| Tolerance of Shaft (T1) | +0 -0.0018 in |
| Total Width at Relaxed State (Dimension L) | 11.99 mm0.472 in |
| Type | Internal |
HSM340BXHSRSS
📏 Dimensions on request
MSM85BRHTP
📏 Dimensions on request
LSE912BRHSATL
📏 Dimensions on request
HM903249 - HM903210
📏 Dimensions on request
68514422018
📏 Dimensions on request
HSE900BRHS
📏 Dimensions on request
12X25X7-RLS35-S
📏 Dimensions on request
21075 - 21212
📏 Dimensions on request
68514419714
📏 Dimensions on request
023BULK
📏 Dimensions on request
6215-2RS-C3
📏 Dimensions on request
6204-ZZ-C3
📏 Dimensions on request