6015-2RS-C3
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498481
Custom & Special Bearings · Dimensions on request
1.Series 32 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498481 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.Series 32 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.Series 32 lb |
| Catalogue Ref. | IWpISEczdH |
| # of Locking Screws | Series 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 30.00 mm1.181 in |
| Coupling Size | SLD 1900 |
| Cubic inches | 191.68396 mm³7.54661 in3 |
| Diameter to Flange (Dimension D1) | 69.01 mm2.717 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 34.93 mm1.375 in |
| Locking Screw Size (Dimension T) | M6 |
| Max. Transmissible Axial Force | 12230.00 lbf |
| Max. Transmissible Torque | 637.00 ft·lb |
| Pressure on The Hub | 9677.00 psi |
| Pressure on The Shaft | 8679.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 12.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 47.00 mm1.850 in |
| Shaft Size | 1 3/Series 8 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 50.00 mm1.969 in |
| Tolerance of Hub Bore (T2) | -0 +0.0015 in |
| Tolerance of Shaft (T1) | +0 -0.0016 in |
| Total Width at Relaxed State (Dimension L) | 56.01 mm2.205 in |
| Type | Internal |
23036CDK+A3036NSKDimensions on request
HH923649 - HH923610
📏 Dimensions on request
387 - 382A
📏 Dimensions on request
115BULK
📏 Dimensions on request
MSE808BRHSHTPS
📏 Dimensions on request
HSE808BXHSATL
📏 Dimensions on request
LSM120BXHSNHTPS
📏 Dimensions on request
28980 - 28921
📏 Dimensions on request
SV-DRIVE2500-S
📏 Dimensions on request
GRA012RRB
📏 Dimensions on request
69790499090
📏 Dimensions on request
LSE312BXHSATL
📏 Dimensions on request
LSM150BRHSD
📏 Dimensions on request