HM903247 - HM903216
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498470
Custom & Special Bearings · Dimensions on request
Series 10.14 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498470 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of Series 10.14 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.14 lb |
| Catalogue Ref. | swPyEj9f9A |
| # of Locking Screws | Series 12 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 65.00 mm2.559 in |
| Coupling Size | SLD1900 |
| Cubic inches | 2365.38522 mm³93.12540 in3 |
| Diameter to Flange (Dimension D1) | 153.01 mm6.024 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 95.00 mm3.740 in |
| Locking Screw Size (Dimension T) | M10 |
| Max. Transmissible Axial Force | 59165.00 lbf |
| Max. Transmissible Torque | 8735.00 ft·lb |
| Pressure on The Hub | 12328.00 psi |
| Pressure on The Shaft | 11313.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 61.20 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 120.00 mm4.724 in |
| Shaft Size | 95 x 120 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 96.00 mm3.780 in |
| Tolerance of Hub Bore (T2) | -0 +0.0021 in |
| Tolerance of Shaft (T1) | +0 -0.0021 in |
| Total Width at Relaxed State (Dimension L) | 105.99 mm4.173 in |
| Type | Internal |
LSM480BXHSKPS
📏 Dimensions on request
61905
📏 Dimensions on request
DV-69
📏 Dimensions on request
LSE908BXHFHTPS
📏 Dimensions on request
LSE508BXHSNA
📏 Dimensions on request
28985 - 28921
📏 Dimensions on request
6387 - 6321
📏 Dimensions on request
68514419917
📏 Dimensions on request
LSE808BRHSATL
📏 Dimensions on request
LSE303BRHS
📏 Dimensions on request