LSM150BRHSDQHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498463
Custom & Special Bearings · Dimensions on request
4.41 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498463 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 4.41 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 4.41 lb |
| Catalogue Ref. | z2qpnp4c3m |
| # of Locking Screws | Series 10 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 50.00 mm1.969 in |
| Coupling Size | SLD1900 |
| Cubic inches | 762.58391 mm³30.02299 in3 |
| Diameter to Flange (Dimension D1) | 103.99 mm4.094 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 60.00 mm2.362 in |
| Locking Screw Size (Dimension T) | M8 |
| Max. Transmissible Axial Force | 25612.00 lbf |
| Max. Transmissible Torque | 2311.00 ft·lb |
| Pressure on The Hub | 10443.00 psi |
| Pressure on The Shaft | 9718.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 30.20 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 77.00 mm3.031 in |
| Shaft Size | Series 60 x 77 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 75.00 mm2.953 in |
| Tolerance of Hub Bore (T2) | -0 +0.0018 in |
| Tolerance of Shaft (T1) | +0 -0.0018 in |
| Total Width at Relaxed State (Dimension L) | 83.01 mm3.268 in |
| Type | Internal |
6302-2RZ-C3
📏 Dimensions on request
90X140X13-RLS35-S
📏 Dimensions on request
68514412296
📏 Dimensions on request
68514450039
📏 Dimensions on request
HYDNUT625-HEAVY
📏 Dimensions on request
68514421132
📏 Dimensions on request
MSM65BXHSATL
📏 Dimensions on request
X32928M
📏 Dimensions on request
68514439282
📏 Dimensions on request
LSE412BXHSKPS
📏 Dimensions on request