LSE512BRHFHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498443
Custom & Special Bearings · Dimensions on request
0.66 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498443 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.66 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.66 lb |
| Catalogue Ref. | 6Cgqu8cwdE |
| # of Locking Screws | 4 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 16.00 mm0.630 in |
| Coupling Size | SLD1900 |
| Cubic inches | 37.51741 mm³1.47706 in3 |
| Diameter to Flange (Dimension D1) | 43.99 mm1.732 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 16.00 mm0.630 in |
| Locking Screw Size (Dimension T) | M6 |
| Max. Transmissible Axial Force | 4556.00 lbf |
| Max. Transmissible Torque | Series 112.00 ft·lb |
| Pressure on The Hub | 19145.00 psi |
| Pressure on The Shaft | 13924.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 11.Series 10 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 24.00 mm0.945 in |
| Shaft Size | 16 x 24 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 36.00 mm1.417 in |
| Tolerance of Hub Bore (T2) | -0 +0.0013 in |
| Tolerance of Shaft (T1) | +0 -0.0011 in |
| Total Width at Relaxed State (Dimension L) | 42.01 mm1.654 in |
| Type | Internal |
3992 - 3920
📏 Dimensions on request
LSE203BRHSATL
📏 Dimensions on request
HSM380BRHSHTPS
📏 Dimensions on request
LSE303BXHS
📏 Dimensions on request
KIT.KWVE55-B-900
📏 Dimensions on request
MSM440BXHSRSS
📏 Dimensions on request
6302-ZZ-C3
📏 Dimensions on request
HSE700BRHSHTPS
📏 Dimensions on request
69790498391
📏 Dimensions on request
43118 - 43319D
📏 Dimensions on request
69790498132
📏 Dimensions on request
MSM240BRHSATL
📏 Dimensions on request