X32317
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498424
Custom & Special Bearings · Dimensions on request
6.61 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498424 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 6.61 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 6.61 lb |
| Catalogue Ref. | f0TQzF1TdR |
| # of Locking Screws | 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 26.00 mm1.024 in |
| Coupling Size | SLD 1450 |
| Cubic inches | 1824.77885 mm³71.84169 in3 |
| Diameter to Flange (Dimension D1) | 167.72 mm6.603 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 100.03 mm3.938 in |
| Locking Screw Size (Dimension T) | M12 |
| Max. Transmissible Axial Force | 43544.00 lbf |
| Max. Transmissible Torque | 7144.00 ft·lb |
| Pressure on The Hub | 18780.00 psi |
| Pressure on The Shaft | 17696.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 102.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 144.98 mm5.708 in |
| Shaft Size | 3 15/16 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 44.00 mm1.732 in |
| Tolerance of Hub Bore (T2) | -0 +0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0022 in |
| Total Width at Relaxed State (Dimension L) | 56.01 mm2.205 in |
| Type | Internal |
| Width to Flange (Dimension A) | 30.99 mm1.220 in |
13X28X7-RLS35-S
📏 Dimensions on request
HSM340BRHSATL
📏 Dimensions on request
LSM75BXHSATL
📏 Dimensions on request
LSE215BRHSAFQ-4BKPS
📏 Dimensions on request
LSM240BXHSDQRSS
📏 Dimensions on request
6302-Z-NR
📏 Dimensions on request
61911-2RS
📏 Dimensions on request
68514417929
📏 Dimensions on request
MSM190BRHSRSS
📏 Dimensions on request
HSE808BRHSATL
📏 Dimensions on request
LSE704BXHSAFQ
📏 Dimensions on request
MSE715BXHSHTPS
📏 Dimensions on request