LSM70BRHSKPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498387
Custom & Special Bearings · Dimensions on request
13.23 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498387 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 13.23 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.23 lb |
| Catalogue Ref. | R6uY5h554s |
| # of Locking Screws | 12 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 34.00 mm1.339 in |
| Coupling Size | SLD1450 |
| Cubic inches | 4648.18092 mm³182.99925 in3 |
| Diameter to Flange (Dimension D1) | 219.00 mm8.622 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 160.00 mm6.299 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 83274.00 lbf |
| Max. Transmissible Torque | 21857.00 ft·lb |
| Pressure on The Hub | 21010.00 psi |
| Pressure on The Shaft | 18751.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 161.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 210.00 mm8.268 in |
| Shaft Size | 160 x 210 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 54.00 mm2.126 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 68.00 mm2.677 in |
| Type | Internal |
| Width to Flange (Dimension A) | 38.99 mm1.535 in |
6213-2RZ-C3
📏 Dimensions on request
LSE715BRHSAFQAKPS
📏 Dimensions on request
LSE607BRHSAFQHTPS
📏 Dimensions on request
LSM420BRHS
📏 Dimensions on request
MSM190BXHSATL
📏 Dimensions on request
68514412432
📏 Dimensions on request
LSM160BRHFHTPS
📏 Dimensions on request
68514411832
📏 Dimensions on request
HYDNUT95.SEAL
📏 Dimensions on request
68514426081
📏 Dimensions on request
6311-2RZ-NR
📏 Dimensions on request
367 - 362AX
📏 Dimensions on request
938 - 932-B
📏 Dimensions on request