K45X53X22
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498379
Custom & Special Bearings · Dimensions on request
4.41 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498379 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 4.41 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 4.41 lb |
| Catalogue Ref. | q6cqk1aQbz |
| # of Locking Screws | 10 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 24.00 mm0.945 in |
| Coupling Size | SLD1450 |
| Cubic inches | 1310.02624 mm³51.57584 in3 |
| Diameter to Flange (Dimension D1) | 138.99 mm5.472 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 90.00 mm3.543 in |
| Locking Screw Size (Dimension T) | M10 |
| Max. Transmissible Axial Force | 34991.00 lbf |
| Max. Transmissible Torque | 5166.00 ft·lb |
| Pressure on The Hub | 20203.00 psi |
| Pressure on The Shaft | 19455.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 58.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 130 mm5.118 in |
| Shaft Size | 90 x 130 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 40.00 mm1.575 in |
| Tolerance of Hub Bore (T2) | -0 +0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0021 in |
| Total Width at Relaxed State (Dimension L) | 50.01 mm1.969 in |
| Type | Internal |
| Width to Flange (Dimension A) | 29.01 mm1.142 in |
K47X52X17
📏 Dimensions on request
K48X54X25
📏 Dimensions on request
K47X55X28
📏 Dimensions on request
K50X55X13.5
📏 Dimensions on request
K47X53X25
📏 Dimensions on request
K50X55X20
📏 Dimensions on request
LSE615BRHS
📏 Dimensions on request
69790412127
📏 Dimensions on request
MSE808BRHSRSS
📏 Dimensions on request
MSE411BRHFATL
📏 Dimensions on request
LSE315BRHSAFQHTPS
📏 Dimensions on request
LSE411BRHFKPS
📏 Dimensions on request