69790498581
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498331
Custom & Special Bearings · Dimensions on request
1.61 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498331 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.61 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.61 lb |
| Catalogue Ref. | 9VC6pO9Aa0 |
| # of Locking Screws | Series 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 20.00 mm0.787 in |
| Coupling Size | SLD 1350 |
| Cubic inches | 458.97509 mm³18.06989 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 55.58 mm2.188 in |
| Locking Screw Size (Dimension T) | M8 |
| Max. Transmissible Axial Force | 22537.00 lbf |
| Max. Transmissible Torque | 2054.00 ft·lb |
| Pressure on The Hub | 22481.00 psi |
| Pressure on The Shaft | 25237.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 26.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 85.00 mm3.346 in |
| Shaft Size | 2 3/16 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | Series 33.50 mm1.319 in |
| Tolerance of Hub Bore (T2) | -0+ 0.0022 in |
| Tolerance of Shaft (T1) | +0 -0.0018 in |
| Total Width at Relaxed State (Dimension L) | 41.00 mm1.614 in |
| Type | Internal |
BA455550ANDGEDimensions on request
68514472006
📏 Dimensions on request
68514484259
📏 Dimensions on request
68514465455
📏 Dimensions on request
LSE200BXHSKPS
📏 Dimensions on request
365 - 362AC
📏 Dimensions on request
LSM160BRHSDQ
📏 Dimensions on request
X32220
📏 Dimensions on request
95 VS V
📏 Dimensions on request
68514449991
📏 Dimensions on request
MSE512BXHSAFQHTPS
📏 Dimensions on request
900 VL R
📏 Dimensions on request
68514422193
📏 Dimensions on request