LSM300BXHFRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498315
Custom & Special Bearings · Dimensions on request
0.55 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498315 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.55 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.55 lb |
| Catalogue Ref. | TWfhSS9Ca4 |
| # of Locking Screws | 6 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 17.00 mm0.669 in |
| Coupling Size | SLD 1350 |
| Cubic inches | 116.40128 mm³4.58273 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 19.05 mm0.750 in |
| Locking Screw Size (Dimension T) | M6 |
| Max. Transmissible Axial Force | 8733.00 lbf |
| Max. Transmissible Torque | 273.00 ft·lb |
| Pressure on The Hub | 18710.00 psi |
| Pressure on The Shaft | 34954.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | Series 10.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 47.00 mm1.850 in |
| Shaft Size | 3/4 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 28.00 mm1.102 in |
| Tolerance of Hub Bore (T2) | -0 +0.0015 in |
| Tolerance of Shaft (T1) | +0 -0.0013 in |
| Total Width at Relaxed State (Dimension L) | 34.01 mm1.339 in |
| Type | Internal |
68514442581
📏 Dimensions on request
69790498285
📏 Dimensions on request
LSM320BRHS
📏 Dimensions on request
68514458215
📏 Dimensions on request
69790498216
📏 Dimensions on request
SNT 524-620 - 22320K - TA620
📏 Dimensions on request
LSE2100BXHSHTPS
📏 Dimensions on request
1147
📏 Dimensions on request
HSM120BRHSRSS
📏 Dimensions on request
14X28X6-RLS35-S
📏 Dimensions on request
LL217849 - LL217810
📏 Dimensions on request
LSM200BXHSRSS
📏 Dimensions on request
HSE512BXHS
📏 Dimensions on request