LSE611BRHSAFQRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498314
Custom & Special Bearings · Dimensions on request
22.05 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498314 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 22.05 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 22.05 lb |
| Catalogue Ref. | DlWMv7bBcw |
| # of Locking Screws | 15 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 44.00 mm1.732 in |
| Coupling Size | SLD1350 |
| Cubic inches | 8172.86053 mm³321.76616 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 200.00 mm7.874 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 122755.00 lbf |
| Max. Transmissible Torque | 40274.00 ft·lb |
| Pressure on The Hub | 19290.00 psi |
| Pressure on The Shaft | 20450.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 136.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 260.00 mm10.236 in |
| Shaft Size | 200 x 260 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | Series 64.00 mm2.520 in |
| Tolerance of Hub Bore (T2) | -0 +0.0032 in |
| Tolerance of Shaft (T1) | +0 -0.0028 in |
| Total Width at Relaxed State (Dimension L) | 78.00 mm3.071 in |
| Type | Internal |
LSE700BXHSAFQHTPS
📏 Dimensions on request
SSUCTPFB207
📏 Dimensions on request
SSUCTPFB206-19
📏 Dimensions on request
SSUCTPFB207-23
📏 Dimensions on request
SSUCTPFB206-18
📏 Dimensions on request
SSUCTPFB206
📏 Dimensions on request
SSUCTPFB207-21
📏 Dimensions on request
SSUCTPFB205-15
📏 Dimensions on request
SSUCTPFB207-20
📏 Dimensions on request
SSUCTPFB205-16
📏 Dimensions on request
SSUCTPFB207-22
📏 Dimensions on request
SSUCTPFB206-20
📏 Dimensions on request
SSUCTPFB206-17
📏 Dimensions on request