LSM85BRHSNAKPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498296
Custom & Special Bearings · Dimensions on request
1.72 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498296 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.72 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.72 lb |
| Catalogue Ref. | kiMgr97H7G |
| # of Locking Screws | Series 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 20.00 mm0.787 in |
| Coupling Size | SLD1350 |
| Cubic inches | Series 514.61158 mm³20.26030 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 60.00 mm2.362 in |
| Locking Screw Size (Dimension T) | M8 |
| Max. Transmissible Axial Force | 21243.00 lbf |
| Max. Transmissible Torque | 2091.00 ft·lb |
| Pressure on The Hub | 21321.00 psi |
| Pressure on The Shaft | 23641.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 26.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 90.00 mm3.543 in |
| Shaft Size | Series 60 x 90 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | Series 33.50 mm1.319 in |
| Tolerance of Hub Bore (T2) | -0 +0.0021 in |
| Tolerance of Shaft (T1) | +0 -0.0018 in |
| Total Width at Relaxed State (Dimension L) | 41.00 mm1.614 in |
| Type | Internal |
39590A - 39520
📏 Dimensions on request
LSE411BXHSAFQRSS
📏 Dimensions on request
HSM560BXHSKPS
📏 Dimensions on request
MSE204BXHSRSS
📏 Dimensions on request
68514470005
📏 Dimensions on request
HYDNUT180.SEAL
📏 Dimensions on request
69790497974
📏 Dimensions on request
69790492075
📏 Dimensions on request
68514425204
📏 Dimensions on request
LSE408BRHSATL
📏 Dimensions on request
LSM120BXHSNQATL
📏 Dimensions on request
69790498230
📏 Dimensions on request