LSM130BXHSATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498287
Custom & Special Bearings · Dimensions on request
0.75 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498287 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.75 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.75 lb |
| Catalogue Ref. | StmqgJ6i5X |
| # of Locking Screws | Series 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 17.00 mm0.669 in |
| Coupling Size | SLD1350 |
| Cubic inches | 189.74663 mm³7.47034 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | Series 32.00 mm1.260 in |
| Locking Screw Size (Dimension T) | M6 |
| Max. Transmissible Axial Force | 11079.00 lbf |
| Max. Transmissible Torque | 582.00 ft·lb |
| Pressure on The Hub | 19580.00 psi |
| Pressure on The Shaft | 27702.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | Series 10.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 60.00 mm2.362 in |
| Shaft Size | Series 32 x Series 60 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 28.00 mm1.102 in |
| Tolerance of Hub Bore (T2) | -0 +0.0018 in |
| Tolerance of Shaft (T1) | +0 -0.0015 in |
| Total Width at Relaxed State (Dimension L) | 34.01 mm1.339 in |
| Type | Internal |
021BULK
📏 Dimensions on request
68514411711
📏 Dimensions on request
3MM9308WI
📏 Dimensions on request
68514419524
📏 Dimensions on request
LSE300BXHSAFQA-4B
📏 Dimensions on request
68514445930
📏 Dimensions on request
84527105157
📏 Dimensions on request
KIT.KWVE20-B-200
📏 Dimensions on request
HSE912BXHSATL
📏 Dimensions on request
MSE704BRHSAFQA
📏 Dimensions on request
14125A - 14282
📏 Dimensions on request
MSE508BRHSRSS
📏 Dimensions on request