HSM580BRHSATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498235
Custom & Special Bearings · Dimensions on request
17.Series 64 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498235 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 17.Series 64 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 17.Series 64 lb |
| Catalogue Ref. | 9QJQvCbJcG |
| # of Locking Screws | 12 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 44.00 mm1.732 in |
| Coupling Size | SLD1750 |
| Cubic inches | 6677.05235 mm³262.87608 in3 |
| Diameter to Flange (Dimension D1) | 243.99 mm9.606 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 180.00 mm7.087 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 87657.00 lbf |
| Max. Transmissible Torque | 25883.00 ft·lb |
| Pressure on The Hub | 15271.00 psi |
| Pressure on The Shaft | 14621.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 136.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 235.00 mm9.252 in |
| Shaft Size | 180 x 235 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | Series 64.00 mm2.520 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 78.00 mm3.071 in |
| Type | Internal |
| Width to Flange (Dimension A) | 49.00 mm1.929 in |
68514439504
📏 Dimensions on request
68514450014
📏 Dimensions on request
LSM45BXHSNQKPS
📏 Dimensions on request
68514448608
📏 Dimensions on request
69790497941
📏 Dimensions on request
LSE507BXHS
📏 Dimensions on request
LSE212BRHSAFQHTPS
📏 Dimensions on request
MSE704BRHSAFQAATL
📏 Dimensions on request
MSE512BRHSAFQATL
📏 Dimensions on request
LSE207BRHSHTPS
📏 Dimensions on request
68514410198
📏 Dimensions on request
113BULK
📏 Dimensions on request