LSM110BXHSHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498232
Custom & Special Bearings · Dimensions on request
11.68 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498232 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 11.68 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 11.68 lb |
| Catalogue Ref. | aR5DkI2t1e |
| # of Locking Screws | 10 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 34.00 mm1.339 in |
| Coupling Size | SLD1750 |
| Cubic inches | 4215.73117 mm³165.97367 in3 |
| Diameter to Flange (Dimension D1) | 208.99 mm8.228 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 150.00 mm5.906 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 73047.00 lbf |
| Max. Transmissible Torque | 17974.00 ft·lb |
| Pressure on The Hub | 19351.00 psi |
| Pressure on The Shaft | 17545.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 136.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 200.00 mm7.874 in |
| Shaft Size | 150 x 200 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 54.00 mm2.126 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 68.00 mm2.677 in |
| Type | Internal |
| Width to Flange (Dimension A) | 38.99 mm1.535 in |
LFSR32-150/180-St
📏 Dimensions on request
68514458615
📏 Dimensions on request
6318-2RS-C3
📏 Dimensions on request
LFS32-F
📏 Dimensions on request
HSE800BXHSATL
📏 Dimensions on request
69790497999
📏 Dimensions on request
LSE515BXHSDRSS
📏 Dimensions on request
024PKG
📏 Dimensions on request
TKVD25-ADK
📏 Dimensions on request
LSM65BRHS
📏 Dimensions on request
6309-N-C3
📏 Dimensions on request
239/750YMBW509C08C3
📏 Dimensions on request