GRA200RRB
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498212
Custom & Special Bearings · Dimensions on request
1.01 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498212 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.01 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.01 lb |
| Catalogue Ref. | S3Ac1y6q67 |
| # of Locking Screws | Series 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 17.00 mm0.669 in |
| Coupling Size | SLD1750 |
| Cubic inches | Series 222.71777 mm³Series 8.76842 in3 |
| Diameter to Flange (Dimension D1) | 73.99 mm2.913 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 38.00 mm1.496 in |
| Locking Screw Size (Dimension T) | M6 |
| Max. Transmissible Axial Force | 9656.00 lbf |
| Max. Transmissible Torque | 602.00 ft·lb |
| Pressure on The Hub | 15742.00 psi |
| Pressure on The Shaft | 18310.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | Series 10.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 65.00 mm2.559 in |
| Shaft Size | 38 x 65 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 28.00 mm1.102 in |
| Tolerance of Hub Bore (T2) | -0 +0.0018 in |
| Tolerance of Shaft (T1) | +0 -0.0015 in |
| Total Width at Relaxed State (Dimension L) | 34.01 mm1.339 in |
| Type | Internal |
| Width to Flange (Dimension A) | 22.00 mm0.866 in |
68514449972
📏 Dimensions on request
H924045 - H924010D
📏 Dimensions on request
HM89446 - HM89410
📏 Dimensions on request
HSM280BRHSATL
📏 Dimensions on request
69790498542
📏 Dimensions on request
LSM40BXHSAFQA
📏 Dimensions on request
HM262749V - HM262710
📏 Dimensions on request
LSE908BXHFATL
📏 Dimensions on request
MU-DIN508-M4x5
📏 Dimensions on request
68514476250
📏 Dimensions on request
LSM480BXHSATL
📏 Dimensions on request
LSE503BRHSNQKPS
📏 Dimensions on request